Conserte seus objetos Comunidade Loja

4994 Perguntas Visualizar todos

Opções

screen messed up after battery replacement?

I just replaced the battery on my iphone 6. did it while following a video... everything seemed okay. I removed the screen when I replaced the battery to avoid messing it up from what the DIYers had told me that would be best, so I took the screen off thinking that I'd avoid messing the screen up but now the screen is totally &&^&@@... its got lines running all through the screen and nothing is legible, and the touch doesn't respond. (i'm assuming it doesn't respond bc i can't see any apps etc, but touching the screen did nothing.)

What did/ could I have done to mess it up and is it something i can fix on my own or did I just waste money replacing a battery myself just to &&^& my phone up and end up paying for a repair anyway...

Any advice will help!

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 8
Adicionar um comentário

4 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Check the connector ribbons on your screen. Make sure none of them are ripped. Then check the connectors themselves, on the screen and the board, make sure there's no damage to those. If there isnt any visible damage, then try reinstalling the screen. Be sure to click one side of the connector and then the other side until it clicks in completely. Don't push the middle. And then power cycle your phone. I think your data cable popped off which can result in black or white lines in the display. Did you keep the battery unplugged while you re-installed the screen?

Esta resposta foi útil?

Sim Não
Pontuação 10

4 comentários:

you just got 12 rep from me upvoting you. Congrats on 100 rep! keep up the good work!

por

Thank you so much! I will try. Now if only someone could help me with my question

por

Thank you! It works perfectly after unplugging the battery connector before installing the screen.

por

Thanks! I got the white lines on screen too. I took off cable connectors found a piece of the battery adhesive on one connector. Tried again same thing. Did another few times, still lines. I googled and found this answer. I then put together making sure i pushed connector one side at a time until clicked. That worked!

por

Adicionar um comentário

Opções

Thank you!! Connecting the screen with the battery disconnected fixed it! It made me realize that EVERY TIME i tried to reconnect the screen the battery was still plugged in. Thank you so much! I could not have afforded a screen replacement too lol

Esta resposta foi útil?

Sim Não
Pontuação 4

1 comentário:

Great! I'm glad that is was an easy fix! Next time remember to unplug the battery when taking off and putting on the screen, otherwise you can short out the screen and blow the back light filter like I have done before. Im glad you didn't! :)

por

Adicionar um comentário

Opções

I did it over and over in all ways it's still not working and I still got lines going through it. HELP!

Esta resposta foi útil?

Sim Não
Pontuação 0

1 comentário:

I got lines the first seven times i tried to get the screen to work but on the 8th time the screen works fine. Now all the touch sensitivities are going nuts

por

Adicionar um comentário

Opções

You need to put the touch screen flex properly

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Tami B será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 15

Últimos 30 dias: 63

Duração total: 17,655