Conserte seus objetos Comunidade Loja

Released October 24, 2011 / 2.2, 2.4, or 2.5 GHz Quad-core Intel Core i7 Processor

405 Perguntas Visualizar todos

Opções

Mac wont start up, both fans spin for 2 secs, Sleep LED blinks once

last 4 of serial # DV7L

When trying to power up with power button :

- Mac starts

- Both fans spin for 2 sec

- Sleep LED blinks once

- all shuts off, cycle repeats without pushing power button on

Battery indicator full. When I unplug battery with adapter attached, Mac wont react at all.

Tried different RAMs, HDDs, SSDs. Reseting SMC, NVRAM, 20sec battery unplug - no luck.

Any of you guys had smth similar with POST ?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
1 comentário

Does the logic board show any signs of liquid damage?

por

Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Disconnect the mag-safe, disconnect the battery. Press and hold the power button for 10 seconds. Reconnect battery, reconnect mag-safe and tell us if it booted.

Esta resposta foi útil?

Sim Não
Pontuação 1

4 comentários:

Tried it, disconnected Magsafe and battery, pwr button hold for 10sec. Reconnected Magsafe - fans spin instantly without pushing pwr button on. Pushing power button on, doesn't change anything.

No liquid damage visible.

por

It should have restarted spontaneously after doing that. Your repeated procedure is NOT the sequence I told you (what about the battery)?

por

tried it now, exactly as you suggested - no changes

por

I am at a loss on this one. I have never seen one that wouldn't boot with this method that didn't have liquid damage. Sorry, maybe @danj has an idea.

por

Adicionar um comentário

Adicionar a sua resposta

Hubert H. será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 13

Duração total: 94