Ir para o conteúdo principal

Model A1040 / 10, 15, 20, 30, or 40 GB hard drive / four touch-sensitive LED backlit buttons above touch wheel

97 Perguntas Visualizar todos

won't charge after replacing the battery

I replaced the Battery on a 3rd Gen iPod, and now it won't change. I am trying to change it with a firewire. When i hold down the menu and play/pause button, the screen comes on shows the apple logo then the low battery waring. The apple logo is not on long enough to force the iPod in disk mod to charge it. Any suggestions would be great!

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

@robt619 double check your work and double check the battery. It may be a bad battery. You can try and charge the battery on an external charger with something like around 3.6V and then try again. Make sure that your cable is good and the dock connector is clean, has no bend or broken contacts. Firewire is the sensible way to charge this model iPod.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Robert Thompson será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Duração total: 68