iPhone 6 with no image after screen replacement

I've been fixing iPhones for a while now with no problem. This time that I fixed it for a friend i replaced it with no problem it turned on and everything and about a week later the phone just went black but it is recognized when I connect it to iTunes. Could it be the logic board that was damaged? The phone has never been wet either.

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

Have you checked the connector on the logic board? Check whether it is in good condition and clean it with Alcohol cleaning fluid to have a try.

Esta resposta foi útil?

Pontuação 2

Comentários:

I will try this thank you

por

After trying this multiple times it finally worked

por

Adicionar um comentário

Can you verify if it's no image or no backlight? Try shining a light on the screen and see if you can see anything. If so, it could be a problem with your backlight circuit.

Esta resposta foi útil?

Pontuação 1

Comentários:

There was light at first looked kind of purple but then just went out

por

Adicionar um comentário

This happend to me but on a different phone. The screen is broken talk with your seller

Esta resposta foi útil?

Pontuação 0

Comentários:

I thought it might be that too but i tried 3 different screens and one original that just had a crack

por

Adicionar um comentário

how you fixed your problem? please tell me, I have same problem

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Alex será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 25

Todo: 263