Ir para o conteúdo principal

Apple iPad da primeira geração, disponível nas versões Wi-Fi e 3G com 16, 32 ou 64 GB de armazenamento.

266 Perguntas Visualizar todos

Can I modify an iPad and increase the memory to 128GB?

If I disassemble an iPad, is it possible to replace the internal flash mass memory with a 128GB Samsung SSD 1.8"? what is kind of the iPad's flash mass memory? does the quality of the internal multimedia decrease? Would iTunes support the modified iPad? Would I be able to install the iOS 4.2? Thanx for the answer.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

This question was migrated from http://meta.ifixit.com/.

por

Adicionar um comentário

1 resposta

Solução escolhida

No. The NAND flash is soldered to the main board, and it does not have an interface that's compatible with an SSD (or space inside for a drive).

It is hypothetically possible to replace the flash chips with larger capacity chips, but that would require a sophisticated surface mount de/soldering setup. In English: a semiconductor company could do it, but probably not an individual.

Esta resposta foi útil?

Pontuação 2

1 comentário:

There is a bunch of equipment on Ebay, for a 150$ which helps u to do it fast and easy. Depend on your will, and manual capabilities. Videos on facebook, and YouTube also. Approximately an hour job

por

Adicionar um comentário

Adicionar a sua resposta

Francisco será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 3

Duração total: 10,874