Rep: 47
1
2
The microphone cord seems to have a contact failure. I would be able to unweld the 3 little cords inside but I don't know with what cord I could replace it. I have a headphone cord, with a jack, but I'm not sure it'll work... and it has only 2 cords in it, not 3.
Does anybody has an idea ?
Esta é uma boa pergunta?
Rep: 48,3 mil
7
66
97
I am guessing because it is a stereo microphone, one is left, one is right, the 3rd is ground. I would suggest asking customer support on monoprice.com for a extension stereo audio 3.5mm and see if they can find out if there is a ground wire.
Esta resposta foi útil?
Rep: 109
2
Buy a cable with the same type of plug at the end.
For example I see a 3.5mm TRS audio cable selling for $2 plus shipping at monoprice. It has the same plug on both ends.
Just cut off one of the plug and use the cable to replace the bad one.
Esta resposta foi útil?
Últimas 24 horas: 2
Últimos 7 dias: 5
Últimos 30 dias: 5
Duração total: 222
