and yes, i threaded the needle, and it is all looking fine, but when i try to sew, nothing stays. the needle goes in and out and the thread trails uselessly behind.
is there anything to do about this?
peace
K
this machine does not have a bobbin. it also came with no instruction manual.
Esta é uma boa pergunta?
Rep: 101,2 mil
8
172
358
stroicielka, The video link below are the instructions to ensure you are setting it up correctly and shows how to thread properly. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Esta resposta foi útil?
Rep: 10,3 mil
15
29
6
Have you threaded the bobbin or thread it correctly? Check your manual for proper procedure on this
Esta resposta foi útil?
a very important tip for bobbins is the direction that you must follow the instructions for the directions in which the bobbin unwinds!
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 676
