Ir para o conteúdo principal

Apple iPad de primeira geração com Wi-Fi, disponível com 16, 32 ou 64 GB. Modelo número A1219. Os reparos são simples e não exigem aquecimento.

142 Perguntas Visualizar todos

DC power connection to iPad Gen 1 - A1337

Hi All, I hope someone here can help, I need the ability to power up the 1st Gen iPad without the battery by using a DC PSU, I've done this with other iDevices but unable to find pinouts online for the Gen1 iPad. does anyone here know the answer to this it would be very much appreciated.

Update (02/02/2017)

Hi Zakk,

Thanks for your response, I'm actually wanting to power on the iPad 1 without a battery, for example they make a special cable to power iPads but not the iPad Gen 1 https://www.aliexpress.com/item/Professi...

I've seen people solder wired to the power terminals of an iPhone or iPad logic board and connect a DC PSU to power it on, I know it seems extreme but its only for data recovery purposes. I was hoping to find the rails on the iPad 1 logic board that I could connect a DC power source to?

Cheers

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

1 Resposta

Pergunta Mais Útil

Hey mate. The first gen iPad uses the old 30pin connector. This photo should help you with the pin out. Any other questions, feel free to ask. http://4.bp.blogspot.com/-Rlo4uRzUh7o/Tf...

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Nicholas será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 235