Ir para o conteúdo principal

iPhone 6s screen flickers after display replacement

I've repaired a couple iPhone 6s now, and a lot of the time the new screen flickers around the edges. Any ideas what's causing that?

I feel like it's something I'm doing, because I haven't found anyone reporting any issues on it. I would say 5 out of 6 6s repairs that I have done, seem to do this. Last one I did, the issue went away on it's own, but it's just a pain that it seems to happen every time I do this repair.

Any ideas why this happens?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 3
2 comentários

Was the battery unplugged during the screen replacements? Have you tried turning the phone off and on repeatedly?

por

Can you post a pic? That does sound weird.

por

Adicionar um comentário

2 respostas

Solução escolhida

This happens all the time and is nothing to worry about it. I call it the static screen funness. Basically if you don't actually power the phone down and disconnect battery before installing or removing a screen this can happen. It will almost always go away on its own in about 1 hour. Sometimes leaving the phone off helps it go away quicker. Trust me nothing to worry about.

Esta resposta foi útil?

Pontuação 7

1 comentário:

Hi

We should disconnect the battery and wait or all connector must be connected during that?

por

Adicionar um comentário

Try to replace a new screen, first of all you must tested before you move camera, finger etc. Make sure all safe and work before move it

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

patrickyoung1018 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 8

Duração total: 15,388