Rep: 35
3
1
The AC adapter port on the console feels loose. Whenever I plug the power adapter I need to move it in different positions in order to power up the console. I was wondering if it's possible to just solder it correctly or replace it?
I found the part here but would it be just a matter of soldering it in place?
Thanks.
Esta é uma boa pergunta?
Rep: 3,4 mil
42
9
11
I would first try to solder it on again, should usually work.
Esta resposta foi útil?
So, I made something stupid: I was trying to solder the part. I made several attempts and I couldn't get it to work. Now, before I was able to play sometimes by adjusting and moving the power cord in different ways. So me being stupid I plugged the power cord and attempted to solder the part while it was connected to find the sweet spot and put the part in place... and I got a spark and now I can't make it work, doesn't matter how much I move the cable. How can I test if I damaged it?
Well, at least I know I didn't kill it. It still works but even after soldering in place it's still hard to make it work. Thanks.
Rep: 385
8
8
Definitely try re-soldering it back in place first. Sometimes it can get loose and all it needs is some fresh solder to keep it in place.
Esta resposta foi útil?
Últimas 24 horas: 2
Últimos 7 dias: 4
Últimos 30 dias: 15
Duração total: 1,836
1 comentário
crazy ive been having the same problem thx for the anwsers on this guys post ill keep yall updated
por Vlogsand Games