Rep: 1
1
Hello guys,
when i replace battery i destroyed white wire solderig position.
On wich pin conection point is posible to soldering white wire now?
What is the function of white wire?
Thanks
Best regards
Sergy
Esta é uma boa pergunta?
Rep: 17,8 mil
45
20
44
That solder contact passes through the board, so you maybe able to attach it from either side.
Have you carefully removed all the solder:
[produto vinculado ausente ou desativado: IF145-079]
I've found if I desolder those contacts first, the job goes much smoother and the end result is cleaner.
Esta resposta foi útil?
Yup, only thing I'd add would be -- the white wire is for a temperature sensor (thermistor). It is used by the charging circuit to measure the temperature of the battery to determine when to stop charging. If you don't connect it, you should be able to discharge the battery but may or may not be able to charge it.
Últimas 24 horas: 1
Últimos 7 dias: 2
Últimos 30 dias: 10
Duração total: 2,310
