Red screen of death

Hello,

I have replaced the screen on an iPhone 5s. After replacement it couldn't boot up properly, I mean it stuck on the apple logo.

So I thought I could put it in DFU mode to restore it with iTunes. Once put in the DFU mode and connected to iTunes on a Mac, iTunes started to restore and downloaded the newest iOS. When it finished downloading it wrote "Waiting for iPhone". Ok thats normal.

But than accidentally on the phone appears a red screen. iTunes gives me an error 4013.

Thought it could be the front camera as I faced that problem in the past already with other iPhones, so I disconnected only the front camera, but still same error.

Thank you

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1

Comentários:

maybe lcd not orginal or have board problem

por

Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

Did you make sure the screws are not mixed up? Mixing up the screw can cause long screw damage to the board.

Esta resposta foi útil?

Pontuação 4

Comentários:

Yes, I did. It isn't my first phone to repair. I don't know how this is possible. Maybe the screen is damaged.

por

Try the old screen then? Also try without the front camera cable connected.

por

The old screen is cracked. I already tried to start without front camera as mentioned in my question.

Thank you for your response

por

Just to see if it can boot with the old screen. If not then there is damage to the board.

por

As Tom said, the simple answer is to put the old screen on and see if it boots. Yes, we know that it is cracked. If it boots with the old screen, you know that its a parts issue. If not, then you know that you need to take the phone apart and examine the board for damage.

Experience says its probably a damaged board.

por

Mostrar mais 5 comentários

Adicionar um comentário

Even a damaged front camera flex can cause red screen of death boot if you didn't know already.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

According to Apple you would need to reinstall iTunes. And when Apple tells you to reinstall iTunes you know that's a dumba** response. Maybe it was caused by the hardware because the iPhone 6s also encountered the same problem and have to use the original touch id cable for it to work. Try put your original home button and front camera module in the new screen and see if it works

Esta resposta foi útil?

Pontuação 0

Comentários:

It is the original. Shouldn't it work if I unplug them?

por

Adicionar um comentário

Adicionar a sua resposta

Alex será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 19

Últimos 30 dias: 99

Todo: 7,704