Conserte seus objetos Comunidade Loja

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Perguntas Visualizar todos

Opções

Home button not pressing

I just replaced the screen and home button. When I powered the iPad back on, the home button worked, but it had to be pressed rather hard in order to work. The button isn't squishy at all, whereas it doesn't press down hardly at all. I opened it back up to try to realign it, with no luck so far.

Keep trying to realign it or is there something I should know?

(BTW, I'm a high schooler and this is a project, so I'm a little on the novice side!)

(Just a little...)

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Hi Sarahhukill,

With the iPad 2 the home button, as you know is adhered to the back of the screen and pressing on the 2 contacts on the Dock port.

I would check the home button itself by holding it on the dock port contact and seeing if it activates properly when pressed (if it still needs to be pressed harder) it maybe that there is a fault with the Home Button and it needs replacing.

Also I would check the adhesive is properly keeping it in place and it is aligned correctly as this might be causing you to need to press the button further to create the contact.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

sarahhukill será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 57