Water Dancing Speakers feature jets of water illuminated by bright multi-coloured LED’s.

7 Perguntas Ver todas

Why is my water not shooting up?

So I got water speakers about a year ago and several months ago I noticed that only one speaker was shooting water and then the other speaker would stop shooting water even with the volume all the way up. Does anyone know the problem?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

Did you see this guide? Water Dancing Speakers Refill

Esta resposta foi útil?

Pontuação 3

Comentários:

I'm having the same problem but my speakers don't need refilling. How do I fix this?

por

Mines just not turning ON its charged. But i keep pressin yhe on button. How exactly us this possible

por

Adicionar um comentário

i have an art+sound speaker and only one dancing speaker works. the other one lights up and instead of shooting water the lights blink. the blink is perfectly synced with the music and the broken one does not even make sound. these are new speakers and are not overused. i would like the solution to this problem as soon as possible. thanks.

Esta resposta foi útil?

Pontuação 1

Comentários:

i checked the amount of water and there is no refill needed.

por

Adicionar um comentário

could be the motor, i have had the same issue with only one of mine (different brand maybe though but still, only one speaker fails, while the other continues to operate)… i have replaced the motor in this speaker 3 times and while they last a while (a few months) they eventually fail… the issue here is, with mine anyhow… is that the DC brushed motor arcs/sparks too much when the speakers are operating at low volume and the motor is trying to run slowly… it burns the brushes out in ‘the motor… anyhow… i have been considering modifying mine with a small amplifier basically to operate the motor at higher speeds at lower volumes… only downside is… with a simple, lets say SCR circuit, the motor will max out at full speed sooner (or at a lower volume than normal)… with a PIC16F84A or similar though… the SCR gate value could be controlled according to the volume level and you could achieve better results over the variations of motor speed in relation to volume

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Gianna Urena será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 16

Últimos 7 dias: 172

Últimos 30 dias: 638

Todo: 10,781