Hi I've replaced the battery and the fan, after 2 or 3 attempts it fired up to desktop, I set the time and date and then the cursor froze and it started overheating. I turned it off and started process again but now it struggles to turn on.
I can hear the fan but if left too long it gets hot. Its a 2010 model. Any suggestions would be very welcome.
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
Disconnect the hard drive and cable and boot from the original system installation disk and report your findings.
Esta resposta foi útil?
Rep: 1
2
try to remove the RAMs and unplug the battery with the magsafe unplugged press the power button for 15 seconds then plug every thing back again and reset the PRAM and the SMC.
it worked for me hope this will help you.
good luck
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 5
Últimos 30 dias: 5
Duração total: 101
4 comentários
oh sorry, its a MacBook pro 13"
por Crystalclear
Can you give us the year, or better yet, can you give us the full serial number so we can correctly identify your system.
por Dan
Its a 2010 model.
por Crystalclear
What made you replace the fan? Also boot the mac holding the shift key, then report back.
por John