We just replaced our 2.2 engine with a 2.3 upgrade. We were told we had to put the sensors from our old engine into the new one so we did that. Checked the timing its on. But for some reason it will not start? What else do we do?
Esta é uma boa pergunta?
Rep: 57,5 mil
18
77
212
First check and see if you're getting spark. Could be a problem with the ignition somewhere. Second check and see if the starter is kicking
Esta resposta foi útil?
Thank you.
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 128
