Ir para o conteúdo principal

Modelo A1502 / processador 2,4, 2,6 ou 2,8 GHz de dois núcleos / Lançado em outubro de 2013

552 Perguntas Visualizar todos
Pergunta encerrada

Screen Backlight behaving strangely after minor soda spill?

I spilled soda on my macbook pro 13" late 2013. The screen backlight started to acts nuts, It decides to turn on and off by itself. Most often, however, it is not working- But when it turns on, it stays on until I close the lid or restart the device. I have no Idea how to fix it myself. Also, in my country no one is using or fixing Macs, so can't get some one to fix it.

What do you think the issue is knowing that its been 5 months and no improvement.

P.S. Apple says you need everything new inside the macbook pro(That when I was abroad ). The repair price is close to a brand new one. I have been using it connected to a monitor for the the time the screen backlight is off and when it gets resurrected I use it as normal laptop with a shiny retina screen.

Block Image

Block Image

Block Image

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
2 comentários

I just received a new logic board from iFixit, and I installed it on the the macbook. Everything works fine now, thank you iFixit.

por

AWESOME! Good job.

por

Adicionar um comentário

4 respostas

Pergunta mais útil

Hi there, Sounds like the backlight has been damaged. It is located under the keyboard and can be replaced with out having to remove the keyboard. It is quite a technical repair though requiring you to remove the motherboard. The part is not to expensive to buy, just requires a bit of computer dismantling knowledge.

Good Luck

Esta resposta foi útil?

Pontuação 1

1 comentário:

My issue is the screen backlight not the keyboard. If you got it right, what exactly does it look like in order to change it and get the screen lights to work.

por

Adicionar um comentário

Have you tried disassembling it, drying it out, and cleaning up the dried soda/syrup? I'm thinking the culprit might be an intermittent short occurring.

Esta resposta foi útil?

Pontuação 0

1 comentário:

Yes, I have cleaned and dryed the liquid.

por

Adicionar um comentário

Post some pics of the board and by the lcd connector too.

Esta resposta foi útil?

Pontuação 0

2 comentários:

Will be posting picture shortly

por

Posted above

por

Adicionar um comentário

Block Image

I think there's corrosion on the lcd board you will need to remove the clutch cover to expose it.

Esta resposta foi útil?

Pontuação 0

2 comentários:

I did that already and its clear.

por

Just replace the lcd flex cable then

por

Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 146