Why wont my screen show any display?

Question

Reparo iPhone 4

iPhone de quarta geração lançado em 2010. O reparo é simples, mas o vidro frontal e o LCD devem ser substituídos juntos, como uma unidade. GSM / 8, 16 ou 32 GB de capacidade / Modelo A1332 / Preto e Branco.

2375 Perguntas Visualizar todos

Lisa @lisa26917

Rep: 1

Postado: 23 de out de 2015

Opções

Why wont my screen show any display?

When I connect my phone to the computer it is recognized and makes the charging noise.When I hold down the home button the voice control comes on.The only problem is that when I try to turn on the phone the screen lights up but its a black screen with a blue tint .So I know the phone works but nothing displays just a black/blue screen and I know its on because theres a crack near the top because when i press the power button a white light shows up then turns off when i click the power button again.Please someone help

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

3 respostas

Solução escolhida

iMedic @theimedic

Rep: 57,5 mil

iMedic Phone Repairs

18

77

212

Postado: 23 de out de 2015

Opções

Yeah, you've broken your display assembly. It's fixable, if you want to do it yourself, just takes some time

iPhone 4 CDMA

iPhone 4 (CDMA/Verizon) Screen

That's for phones on sprint or Verizon. There's a different part for GSM phones, such as at&t or T-Mobile

Produto

iPhone 4 (CDMA/Verizon) Screen

$34.99

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário

score 1 · Answer 1 · 2015-10-23T13:34:58-07:00

Pergunta mais útil

Next Life Repair @nextliferepair

Rep: 1,9 mil

iOutlet - Bowling Green Ohio

6

4

1

Postado: 23 de out de 2015

Opções

It sounds like the LCD on the device has gone out

Esta resposta foi útil?

Sim Não

Pontuação 1

5 comentários:

Am i able to repair this on my own because once when the lcd was disconnected after dropping my phone i opened the back and presssed back into place

23 de out de 2015 por Lisa

I would disconnect the ribbon cable and insert it back in if it's still doing the same thing then unfortunately the LCD gave out and needs to be replaced with a new digitizer.

23 de out de 2015 por redacted

and DO NOT press on the back of the shield once you open the battery cover, by doing that you could damage the ribbon cable or circuit chips that are underneath. Find a small screwdriver and take the shield off and disconnect the ribbon cable and pop it back in, it may not be seated correctly.

23 de out de 2015 por redacted

Also when assembling back together put the screws exactly back were they came from, there are different sizes of screws and you don't want to put a screw at a place where it doesn't belong which could cause damage.

23 de out de 2015 por redacted

You can check the inside to make sure its just not a loose cable. The repair is something you can do yourself! iFixit has the part and guide!

23 de out de 2015 por Next Life Repair

Adicionar um comentário