Epson WF-3520 firmware update failure
When putting the drivers into a new Win7 install, Epson's search-and-destroy printer identifier and installer decided on its own to update firmware; of course, it crashed. Printer is now stuck in partial-start state - when you power it up, Power LED flashes and beeps once or twice as normal, display starts to come up, then it quits.
I have the firmware updater utility that is SUPPOSED to work, and a couple of the Epson service programs, but they will not connect to the printer via USB.
What is the procedure to do a hardware reset on the WF-3520 (panel keys held down, timing...) to get the bootloader in the microcontroller to reset and go to the "Recovery Mode" function where you can install firmware?
Esta é uma boa pergunta?
1 comentário
Epsons are just all DUDs now. Biggest piece of crap cant connect to wifi cant connect with the usb cable and on a laptop that can it fails to print red or blue! No the Iink is not empty No the Head cleaner does not work I got 10 pages out a brand-new printer and it went Kaput! Piece of crap. Still trying a yr later and as soon as it gets to Firmware update it freezes says the printer isn't there and round n round in circles. It's the 'Fancy new cartridgeless' DUD!
por Angry Epson owner