Ir para o conteúdo principal

A versão somente wi-fi do Air iPad, da Apple, modelo número A1474. Disponível nas cores cinza espacial ou prata, conta com o processador A7 personalizado, com configuração de armazenamento de 16, 32, 64, e 128GB.

299 Perguntas Visualizar todos

ipad air LCD not turning on after digitizer replacement

hello , i got the same problem with my i pad air 5 where screen stays black after digitizer replacement. funny thing my battery was disconnected during replacement. any ideas?

i tried reseating clips, home button and off button hard reset old digitizer also not working.

I pad is detected by iTunes and when i connected the charger the charging sound keeps beeping continuously. please advise

Update (09/15/2015)

I think I found the problem. does any one know what this part is called and how to go about it. my soldering skills are rubbish. is it a fuse of some kind. how could this have happened if I was wearing static band and battery was disconnected.

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

The backlight filter is possibly blown. I have run into on either a mini or an ipad air, I don't remember which, a situation where I thought I had killed the backlight filter but it tested good so I put a different lcd on it and it worked. After that, I put the original lcd back and it worked fine. I never did figure out what was screwed up but it may be worth giving a try.

Gotta try the easy fixes before chasing after the board work so try a different lcd first. Maybe even disconnect the battery and let it sit for 30 minutes or so disconnected and come back to it. They're finicky.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

frankmasiko será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 613