Between sweat and water the copper charging spot on the watch has appeared to have corroded. It hasn't caused any issues with charging or anything but I want to find out how to clean it or repair it. Does anyone know of a good way of doing this? I'm thinking of using some isopropyl alcohol.
Esta é uma boa pergunta?
Rep: 2,2 mil
4
15
1
Why fix it if its not broke right?
Here is the guide for teardown of the Gear Fit.
Once tore down you clean it with some isopropyl alcohol 91% at least.
Esta resposta foi útil?
A short fix as well.... if the gold/copper contacts on the back of the Fit itself are corroding like mine did, use a stiff pencil eraser and rub at the contacts carefully. If you do this before the corrosion sets in too much, you should be able to prevent it, with regular cleaning.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 2,239
