Rep: 23
1
At machine start up the message ""Error 46 clean impossible" appears.
user's guide says it is a generic mechanical problem, but there's nothing wrong inside.
Could be the printing head to be replaced?
Esta é uma boa pergunta?
Rep: 55
2
I am currently working on this myself. It means your ink absorber pad is full. I purchased a new pad, but now I can't find instructions on how to install it. Apparently, Brother really wants you to have a technician do this, or buy a new printer. I've seen posts that say you can clear the message, but if the absorber pad is full, you could end up with a big mess.
Esta resposta foi útil?
Thank you very much Krystal, finally i got it :)
Where did you get the new pad? /Peter
Rep: 459
8
3
1
From what I can tell is find a guide to dissemble your printer.
It might be messy but not shore if it is possible to wash them out and then dry them? (Just an idea as I have never done this before but was wandering it myself when I was cleaning my printhead and if they possibly need replacing anyways could be worth trying)
If it is anything like mine they come in a plastic holder and is full of a felt like material on both sides of the print heads track and also a couple smaller ones under the print head park position.
Don't know if this link is of any help
http://homepage.ntlworld.com/boots44/bro...
Esta resposta foi útil?
ITS A SIMPLE TRICK FOR YOU TO DISTROY YOUR PRINTER. HERES THE REAL ANSWER. PRESS MENU PRESS BLUE START PRESS MENU , PRESS BLUE MAINTANCE 10 IS ON SCREEN, SCROOL DOWN TO MAINTENANCE 80 AND PUSH OK. PUSH ARROW UP TO PURGE:00011 AND ENTER 2783 PURGE:0000 IS ON SCREEN. PUSH RED/STOP RED/STOP AND UNPLUG. LET IT REST FOR A MINUTE. PLUG BACK IN AND DO IT AGAIN FROM BEGINING. Machine will reset to factory settings. NO TOOLS NEEDED. THIS WORKS FOR ALOT OF BROTHER PRINTERS BUT SOME OF THE PURGES HAVE BEEN ABREVIATED TO PRG 001.
Esta resposta foi útil?
Últimas 24 horas: 3
Últimos 7 dias: 4
Últimos 30 dias: 17
Duração total: 743
1 comentário
At least these people don't kid around. What a great fatalistic message! It's to late to work on tonight but I'll research tomorrow. Give us a little bit of time.
por mayer