Ir para o conteúdo principal

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

Pergunta encerrada

Front Panel Digitizer Assembly Installation

How do I clean the LCD screen without damaging it? It has collected some small particles (tiny shards from the front panel removal), a partial palm print and a possible epoxy smudge (its very small).

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

Put on some latex gloves to avoid getting finger prints on the LCD. Use an air blower or very soft synthetic paintbrush or camera lens cleaning brush to knock flecks off. Kim Wipes or a new microfiber cloth and an ammonia free glass cleaner will work to remove the stubborn spots. Generally if its safe for use on a pair of glasses or camera lens it is ok to use on the LCD.

Don't use windex.

You could also buy a cheap camera cleaning kit from amazon that will come with a air blower and brush.

http://www.amazon.com/Kimtech-Science-Ki...

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário
Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Ao todo: 61