Flex screen, display iPhone 6, in or outside of the shield plate?

The flex belongs on the inside of the plate. To me it sounds like you purchased a very low grade/cheap screen and the seller doesn't want you to put any pressure on that flex cable. Not sure if it will cause any damage if you leave the flex cable outside of the plate but Im sure its designed to go behind the metal plate for a reason. I would return the screen and purchase a high quality screen so you can reassemble the screen the way it was manufactured.

Esta resposta foi útil?

Sim Não

Pontuação 2

1 comentário:

Thanks TechyGirl ! ;-)

23 de jul de 2015 por Universo Técnico

Adicionar um comentário

David @david77325 Rep: 2,2 mil DLK IT Solutions 4 4 1 · Answer 1 · 2015-07-23T11:32:43-07:00

David @david77325

Rep: 2,2 mil

DLK IT Solutions

4

1

Postado: 23 de jul de 2015

Opções

I'm not sure exactly what they're asking you to do, but you would always wants to put your phone back together the same way it was taken apart. I have replaced many iPhone 6 screens, and I always put everything back exactly the same way it came out.

Esta resposta foi útil?

Sim Não

Pontuação 1

1 comentário:

Thanks David! ;-)

23 de jul de 2015 por Universo Técnico

Adicionar um comentário

Universo Técnico @universotecnico Rep: 356 Universo Técnico 11 3 · Answer 2 · 2015-07-23T11:50:32-07:00

Universo Técnico @universotecnico

Rep: 356

Universo Técnico

11

3

Postado: 23 de jul de 2015

Opções

The seller, sell screen refurbished, I think that may be problem in the assembly of the new screen refurbished.

It may be, that you think?

Esta resposta foi útil?

Sim Não

Pontuação 0

1 comentário:

It doesn't matter if the screen was refurbished or not. If the screen was properly refurbished he would not be asking you to do this, the fact that he wants you to not resemble the screen properly is a major red flag.

24 de jul de 2015 por Chasity Miller

Adicionar um comentário

Josh White @joshwhite70874 Rep: 2 mil Flash Technologies 6 9 1 · Answer 3 · 2015-07-24T13:12:39-07:00

Josh White @joshwhite70874

Rep: 2 mil

Flash Technologies

6

9

1

Postado: 24 de jul de 2015

Opções

I think what he was asking was for you test the screen before installing it at all. He was asking you to hook up the flex cables with the shields on to test functionality. I work for a parts supplier and we always ask customers to dry-test an item before they install, that way we know if its defective without any installation errors.

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário