Ir para o conteúdo principal

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Perguntas Visualizar todos

How to fix ethernet plug recognition?

Hello,

When I plug an ethernet wire (plugged to a switch with a printer, wifi access point, etc) the network is not recognized. On the Network configuration, the Ethernet dot is still red. And on the switch, the lignt in front of the Quad Core iMac line is off... I used several wires, the several ports of the switch, but nothing...

Under Mac OS X 10.6.4 I see the en0 device, under Windows 7, I see the Broadcom card (but still unconnected) and everything seems alright... Except that when I plug it does nothing...

Any idea ?

Thanks in advance,

And sorry for my poor english.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

2 respostas

Solução escolhida

either the nic on your mac is bad or your switch is bad.

if the port that your printer is plugged into is working try plugging your mac into that port.

If it still does not work and your sure your cable is good then your nic is faulty.

Esta resposta foi útil?

Pontuação 1

3 comentários:

what's a nic?

por

Hi Richard--network interface card--a windows device primarily. Ralph

por

Well, it seems that the nic is dead... Well, what now... Can I change it myself, or is it included on the motherboard ?

por

Adicionar um comentário
Pergunta mais útil

If this is indeed a Late 2009 machine, it's still covered under warranty and Apple will repair it for free.

Esta resposta foi útil?

Pontuação 2

1 comentário:

Thanks for the tip...

por

Adicionar um comentário

Adicionar a sua resposta

Matthias Lamoureux será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 2,236