Rep: 13
1
When I try to put my blu advance 4.0 on by pressing the power button it does not come on. I have to plug in the charger for the phones screen to light up so I can type my password. What can I do to fix this problem by my self.
Esta é uma boa pergunta?
Rep: 649
2
2
1
You probably have a sticky "Power Button" I haven't teared one down but based on experience it's probably using a "dome" button on the side.
If it is.
Open up the phone
Heat up the power button slightly
Peel the orange sticker back to expose the metal dome
Clean it and reassemble.
If it's a "push" button; White tab that clicks into a metal assembly, you will need to resolder a new button onto it.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 3
Últimos 30 dias: 9
Duração total: 886
