Rep: 25
2
The Mac starts up and runs probably on thunderbolt to vga adapter but the built in screen remains black. It has an AMD HD 6770m graphics card so not the one under the repair program.
Any ideas what could be the problem?
Esta é uma boa pergunta?
Rep: 480,2 mil
35
330
971
See if you shine a flashlight into the display at a sharp angle if you can see the faint image of your desktop & an external display works, then you know the LCD's backlight services needs repair.
But, ... Without knowing which model you have I can't tell you more.
Esta resposta foi útil?
Yes there is faint image. I thought there wasnt but i managed to log in and see the dock.
The model is A1312
EMC 2429
Im leaning towards the backlight inverter but not sure how to test this?
I've had a few LED driver board go on me. Here's the IFIXIT guide to get to it and replace it: iMac Intel 27" EMC 2429 LED Driver Board Replacement
I've ordered the board. So I will see how that goes when I get it. I'm sure I will be back on here if all goes wrong.
Thanks for your help.
Take your time and don't force things as some of the connectors are fragile!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 3
Duração total: 1,166
4 comentários
To be clear here: You are able to run your system via an external monitor - correct?
por Dan
Can you give us the last four digits of your serial number so we can identify which model you have.
por Dan
Yes the external monitor works.
DHJP
por lcrooks
iMac 27" 2.7 GHz i5 (Mid-2011)
por Dan