Pular para o conteúdo principal

Repair and disassembly guides for Netgear routers.

29 Perguntas Ver todas

The wifi is not working and the led was not lightining

when we switch on the router we cant get any wifi signal and the led was not glowing

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 3
Adicionar um comentário

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

kits de reparo de baterias de iPhone

Only $29.99

Buy Now

6 Soluções

Resposta Mais Útil

First of all, you check the adapter is working or not if your adapter is working properly then check the power button of your router is on or off. If both not issue means a hardware issue occurs in your router. You need a technician to repair it. If you need a technician then visit here to get full support: Netgear Customer Service

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Try to enter the router's settings -> explorer -> 192.168.1.1 (or something similar, generally the first IP from your private network is the router) .

There check if the WIFI is turned on

OS

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

First of all check whether the WiFi button on the back side of your router is on or not? If not then switch on this button, after doing this.

You can reset your device:

1) Turn off the device.

2) Use a pin to keep pressing the reset button for 15 seconds, and at the same time, power on the device.

Now check again for WiFi networks, hopefully now you will get your WiFi issue resolved. But if you still not get your issue resolved then you can find a router helpline number of your router's brand where you can get your issue resolved.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

1.This router rest and see tha wifi led glow .

2.wifi ic cheak.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Open the router carefully and make sure you don't have swollen capacitors. You can tell a bad capacitors by looking a the top of them. They should be flat NOT curved. If they are bad, replace them.

Also feel around the board and make sure nothing is getting hot. If so check the components in that area for replacing them.

Let me know what worked or if the problem still exists.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

If your router stopped working all of sudden then there may be many different reasons behind it connectivity problem, firmware update, overheating , etc.

you can follow some basic steps to troubleshoot this problem:-

  • check all the cable connections to make sure everything is connected properly.
  • restart your router, modem and computer device.

still if you are not get rid of this problem you can also reset your router to factory setting, so that it should work like a new router.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

naveen23t será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 20

Todo: 953