Rep: 85
2
3
When I last went to plug in my micro USB charger into my Zagg universal Bluetooth keyboard, the charging port was pushed further back into the keyboard. How do I take it apart to repair this device? There are no visible screws anywhere.
Esta é uma boa pergunta?
Rep: 13
1
I just took mine apart. Use a heat gun to soften the adhesive, and slowly remove the rubber, then the case will seprate. The mirco USB connector is weak, and I have had several fail already. this part would otherwise be easy to replace, as it clips on, but Zagg will not sell the part. I may try to bypass the port, and charge directly to the battery...
Esta resposta foi útil?
Rep: 13
1
Not sure if this will help but here it goes. The connection was very loose and cable would fall out. The port was not loose, just seated far back. I took a file and filed down the cable plastic on the connector so it angled properly in relation to the case and port. Problem solved.
Esta resposta foi útil?
Bought a new keyboard after mi puts roba
Esta resposta foi útil?
it broke off during normal use plus the wand has stopped working
Esta resposta foi útil?
were do i buy new keyboard and wand
Últimas 24 horas: 3
Últimos 7 dias: 18
Últimos 30 dias: 55
Duração total: 4,949
