Rep: 13
1
I have a bent pin in the surface pro usb port that sometimes will recognize devices, but other times not. Is it possible to replace the port or is it soldered into the motherboard which would make it more effort than it's worth? Thanks!
Esta é uma boa pergunta?
Rep: 1,5 mil
10
7
5
It will be soldered onto the motherboard. not necessarily more effort than its worth but if you've never done it i would not recommend it.
Esta resposta foi útil?
Rep: 1,1 mil
9
4
1
Pullg the off screen and digitizer are most likely going to wreck the screen and are a major undertaking. Unless the screen is already cracked I don't recommend trying it.
Esta resposta foi útil?
Últimas 24 horas: 3
Últimos 7 dias: 7
Últimos 30 dias: 9
Duração total: 3,793
