I'm trying to replace the CCD and broke the retaining clip on the ZIF connector.
It's a 28-pin connector with approximately 0.381mm pitch.
Does anyone know a part number or manufacture so I can order a new one and swap retaining clips?
Esta é uma boa pergunta?
Rep: 30 mil
74
27
72
I fear you've got quite a challenge there. If you can find a supplier you may find the website is in Japanese or Chinese with a minimum order of 1,000! Your best bet is probably to put a watch on eBay and you may be able to get another A610 cheaply perhaps with a different fault from which you can cannibalise the apropriate part, or the whole logic board so as not to risk damaging the clip in trying to transfer it.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 136
