Ir para o conteúdo principal

Model A1046 or A1095 / 1280x854 screen resolution

118 Perguntas Visualizar todos

Why does my screen scramble after a short period of use?

My laptop has worked well since new but late last year the screen began to show unstable signs, gradually getting worse until it was impossible to use.

The screen developes a sort of coarse pixellated look and is difficult to read. After a short time as if reaching a certain temperature, these coarse pixel or really they're blocks of pixels worsen, making it useless.

Our local Apple repair centre had a look and diagnosed a fault on the motherboard which are either not available as a replacement part or expensive enough to make it an unattractive repair proposition. The tech said he'd never seen the like before. The model number is A1046 with a 1.25GHz processor.

Since then I've bought a M1138 1.67Ghz, which I believe to be the last Aluminium model (1440x960). Touchwood, flawless and a delight.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

1 resposta

Solução escolhida

Your GPU

Graphics Processing Unit (chip) is failing at the solder joint. It's life can be "extended" temporarily with reflowing the solder using a couple of methods, or repaired re-balled (re-soldered) professionally (expensive).

You might try this: http://www.ehow.com/how_5009395_install-... solution.

If this answer is acceptable please return and mark it.

Good Luck,

N.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Robert Bryce será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 961