Pular para o conteúdo principal

A unibody aluminum generation of the Mac mini identifiable by the model number A1347, spanning the Mid 2010 to the currently sold Late 2014 model.

758 Perguntas Ver todas

Can the hard drive be replaced after step 12?

I want to replace the hard drive with an SSD (Solid State Drive). It looks possible after the Wi-Fi antenna plate is removed however you come back to that later during your guide.

Can it be unscrewed and slid out at that point or is further disassembly required?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

PC Laptop Batteries

An easy fix for a big power boost.

Comprar agora

PC Laptop Batteries

An easy fix for a big power boost.

Comprar agora

2 Soluções

Resposta Mais Útil

MacMiniColo's writeup on the server version shows them pulling the top drive out without removing the logic board:

http://www.macminicolo.net/macmini2010.h...

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

I was wondering the same thing. Judging by the 2nd pic, of 12 step, the hard drive almost don't have space to slide out, since the memory slots and the board, is blocking the way for the drive, and also seems that the hdd don't have much space to pulled up.

Let's wait for iFixit's staff last word on this. :)

Esta resposta foi útil?

Pontuação 0

Comentários:

Yeah, I thought the same thing it doesn't look like the drive would come out however it's possible the other side has space below so the visible side could be angled up and then out.

por

Adicionar um comentário

Adicionar a sua resposta

verm será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,801