Conserte seus objetos Comunidade Loja

Lançado em junho de 2012, modelo A1278. Processador Intel com Turbo Boost, até 512 MB DDR5 de RAM vídeo

1624 Perguntas Visualizar todos

Opções

Can you identify this Part?

Hello,

I disassembled my Display Assembly a month ago and was waiting for some parts to arrive.

I have the parts now (glass etc) and wanted to reassemble my Macbook. However when I look at my iFixit Project mat I have 3 screws and a plastic bracket for each hinge.

Now I know where the screws belong but I do not know (anymore) where the plastic bracket belongs.

I uploaded a pic , so you can take a look and hopefully identify the part.

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação -1
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

That looks like the cover that goes on the side of the display hinge cover. There's usually one on each side, and it kind of hooks into the hinge. It's purely cosmetic, so I wouldn't worry about it too much.

I could be wrong though, haven't taken apart one of these display assemblies in a while.

Esta resposta foi útil?

Sim Não
Pontuação 1

1 comentário:

Thanks. Yeah I tried to find a Possible place for it and ended up to place the brackets at the lcd frame.

For anyone with the same problem in the future , just look from the side with a flashlight when the clutch cover is installed. If the plastic isn't installed you can see through. I guess the plastic protects from dust etc .

So first place it with the concave side facing up when looking from the side and you should see the place for the clips. Next install the hinge and you should get the idea since this is the only way it fits .

por

Adicionar um comentário

Adicionar a sua resposta

Buco Escobar será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 66