Rep: 187
3
3
Macbook 13" A1278 Mid 2008
I have a late 2008 macbook unibody aluminum and it would not let me connect to wifi because arport was not an option. I bought a new airport card and installed it but even after that there still is no option for airport in network settings. Please help.
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
Look under the Apple in the upper left hand corner to "about this Mac". Go down to the wi-fi and see if your machine sees the card.
Esta resposta foi útil?
This is what it says i don't think it sees it. (Picture is below)
Rep: 5,5 mil
20
17
12
First, click the + icon in network settings. Choose airport/wifi for the interface. Click create, then click apply. If that doesn't work, check the cable connections. If that doesn't help, replace the logic board.
Esta resposta foi útil?
i would have tried that but it doesn't even show up it only has ethernet, bluetooth dun and pan and ppoe and vpn and some other thing i dont know about.
and replacing logic board wont help as the airport card is completely separate from logic board. The weird thing is that the camara and bluetooth both work. Which share the same cable connecting the single wifi/bluetooth card
Hit the add button (+) and add the wi-fi to the list of options.
i already tried that no option for wifi show up
Rep: 187
3
3
Well it took a little while but i figured it out. It turns out the logic board connector had bent pins so i carefully bent them back into place and wifi works flawlessly now thanks for both of your answers.
Esta resposta foi útil?
of which connector you talking about? I have the same problem
thanks
Please can you explain where is the vent pins? I replace de wifi card, i also replace de cable of wifi/camera , nothing happen, no wifi icon at all. Not even in gray, it just disappear and no airport detected, help,
Rep: 187
3
3
Rep: 13
1
1
Had the same problem Valiera .. with all the same symptoms and attempts ...
... a difference is a screw on the vent is shredded! I can't take the vent off and because of that can't remove the airport card! I hadn't checked the logic board pins, will try that next.
Thanks for your thread it lead to something new.
Esta resposta foi útil?
same here, u ever resolved this issue?
“It turns out the logic board connector had bent pins so i carefully bent them back”
Hi Can you explain where on logic board these pins are?
tx
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 1
Duração total: 8,051
