Rep: 23
1
I completed an iPad digitiser replacement, the smart case now locks the device when placed on top of the device, as normal. However, it also locks when folded behind and contacts the rear. I've opened up the iPad again, but I can't identify the magnets or find a solution.
I also can't find anyone else with this issue, any help would be appreciated.
Esta é uma boa pergunta?
Rep: 37,6 mil
22
51
42
You smart case magnets are probobly to strong I would just turn the feature off on the iPad
Esta resposta foi útil?
Thanks for this. Not quite perfect, but it'll do.
Turning it off is NOT a valid solution. Smh
Rep: 25
3
1
Same problem here: after a replacement the cover turns off the iPad from the back, not on the front
Esta resposta foi útil?
Rep: 91
3
Same thing happens to me. I thought maybe I pinched the ribbon cables. But without that case it all,works fine.
Esta resposta foi útil?
Rep: 79
6
5
This happens when you don't use a genuine home button, it locks when the smart case is on back or front. Add the original or genuine home button (the ones that come with replacement air screens tend to be copies) and the problem will go away
Esta resposta foi útil?
Rep: 13
1
I was in class and then my iPad Air just attached to the desk and the desk is metal and there is a magnet I think in the iPad and the iPad just attraks and it’s just the sid across the camera
Esta resposta foi útil?
Rep: 691
4
3
2
I have an original Apple Smart Case and never experienced this.
Than i cracked my screen and went for a replacement.
Now I have ghost touches and this magnet thing.
The question I have is the guy changed the digitizer glass so what can he have moved to do this?
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 3
Últimos 30 dias: 18
Duração total: 2,359
