Rep: 1
1
My camera takes blurry pictures sometimes even though it's been repaired by the folks at Canon (Cmos sensor was replaced? Or that little sensor that sees the object). It needed an update so it was sent in. Now it takes a blurry picture quite often. Any ideas?
Esta é uma boa pergunta?
Rep: 35,1 mil
140
71
53
sounds like the auto focus isn't right.
when was the repair ?
why did you send it in for an update (the firmware is downloadable on canon's website)?
i would check the focus settings first, maybe the focus field has a wrong setting!
Esta resposta foi útil?
Rep: 8 mil
41
26
10
Does it focus right when you do macro shots? is there a difference if you are zoomed in and zoomed out?
When you sent it in to repair, it should be under warranty for a short period of time. I urge you to send it in again and report this as I am pretty sure this is a hardware problem and not software.
Esta resposta foi útil?
Rep: 493
6
2
2
Recommend contacting Canon again. The CCD sensor may have failed again. Here's more info on the free CCD repair for the A70.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 5
Últimos 30 dias: 6
Duração total: 3,332
