Conserte seus objetos Comunidade Loja

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

383 Perguntas Visualizar todos

Opções

Loud CPU fan after SSD RAID 0 upgrade

I have a 27" mid-2010 iMac with a 1TB HDD and a 256GB SSD. I jus replaced both with two 256GB Samsung 840 Pro SSD's, set them up as a stripped RAID set and installed OSX fresh on the single 512 GB volume.

Initially the HDD and CPU fans were both blasting at full speed. I managed to fix the HDD fan speed by installing SSD Fan Control which reads the S.M.A.R.T. temp. of the SSD's, but the CPU fan mysteriously stays loud. My LCD temperature sensor is firmly plugged but it doesn't seem to make any difference if it's unplugged or not.

Can someone offer any advice to me? Could the LCD temp. sensor be damaged?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

Change the Hard drive temperature sensor cable to Apple part #922-9538. This machine also uses different hard drive temperature sensor cables for the three major hard drive manufacturers. You may also need to use Apples SSD Data cable, part# 922-9538. I have no idea why both cables carry the same part number.

Esta resposta foi útil?

Sim Não
Pontuação 3

2 comentários:

Do you think changing the SATA cables will also fix the loud CPU fan?

por

The racing fan noise is caused by the temperature sensor.

por

Adicionar um comentário

Adicionar a sua resposta

Martin será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 1,008