1.6 or 1.8 GHz dual-core processor, 2 GB or 4 GB of SDRAM, 64 GB or 128 GB SSD

174 Perguntas Ver todas

Power button not working, all other keys ok?

Hey guys

Just got this MBA and it had some heavy liquid ingress. Luckily it happened when the laptop had run out of battery and no attempt to turn it on since.

It cleaned up just fine and everything works great, just the power button doesn't work at all. I have to power on using the jumper pads on the logic board.

I have tested every other key and every single one works which leads me to believe there is some sort of fuse or mechanism triggered when the system detects a short i.e. liquid.

It must be before the logic board as the power jumper pads still works. I'm hesitant to say a keyboard replacment will do it but I guess it might.

Anyone have experience with this?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3 Soluções

Solução escolhida

Well I checked the pins for the power button for continuity when I pushed the button and got nothing so I knew it had to be the keyboard. I popped off the power key and carfully removed the little rubber button. This left the actual contact exposed and pushing hard on this powers up the machine. I just glued in a very small piece of plastic to the underside of the key and now I can use the power button again :) I guess a bit of liquid did just get into the power button so actually, a new keyboard would have sorted it.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário
Resposta Mais Útil

Could be the power button got wet and shorted out… could be the connector or ribbon cable is damaged. You need a new top case (keyboard included) the keyboard alone would not fix this.

If this answer is acceptable please remember to return and mark it.

Esta resposta foi útil?

Pontuação 1

Comentários:

Well I checked the pins for the power button for continuity when I pushed the button and got nothing so I knew it had to be the keyboard. I popped off the power key and carfully removed the little rubber button. This left the actual contact exposed and pushing hard on this powers up the machine. I just glued in a very small piece of plastic to the underside of the key and now I can use the power button again :)

I guess a bit of liquid did just get into the power button so actually, a new keyboard would have sorted it.

por

Adicionar um comentário

This is what I ended up doing. https://youtu.be/HU-6GPD7X_U

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Joel será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 14

Últimos 30 dias: 114

Todo: 3,345