Rep: 7
3
4
Hi there
I just replaced the screen on an iPhone 5 the second time and there are still vertical white lines coming up across the whole screen. Not sure if it is a bad connection put I cleaned it and made sure its connected properly. According to my supplier it is an issue with static in the phone?
ANYONE ANY IDEAS?
Thanks
Esta é uma boa pergunta?
Rep: 6,1 mil
15
20
5
dissconnect and reconnect. be sure its is seated properly, if so, bad screen
Esta resposta foi útil?
Thanks. Do you think there could be issues with static? We did hundreds of screens but never had issues like that. And on 2 separate screens on one phone
nothing to do with static i think. we probably have the same supplier ;-) they tell me the same thing.
they'll try everything just so theyt dont have to pay you back..
Take no notice it is a handset problem probably bad processor I'm an iphone tech over 10y seen this lotts of times, u wont find an lcd that will work I promise u
Esta resposta foi útil?
iPhone hasnt been around 10 years
Rubbish! Works with old cracked screen
@ Danny so if that is the case why didn't I have this problem with the old cracked screen?
Esta resposta foi útil?
Rep: 613
6
1
In the broken screen .... touch screen work?
Esta resposta foi útil?
Rep: 613
6
1
This failure usually stems from the connection of the contacts screen touch screen.
The best way to check this is to take the original screen from another phone and to put it on the phone... To isolate the problem
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 11,388
