SOLUCIONADA: Data Transfer between iMac with faulty logic board and new iMac Intel - iMac Intel

Data Transfer between iMac with faulty logic board and new iMac Intel

Trying to transfer data from a G5 with a faulty logic board to an iMac Intel fresh out of the box. I attempted this once by removing the front panel and using a multi imput bridge connected to the faulty iMac hd to a USB connected to the new Intel. Copied files, but they are just images. My question is, will Migration work with just one fully working computer, and if so, will I need a firewire? Or is there a way to bridge the two and fully transfer data over the bridge cable?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

Postado: 4 de jan de 2013

Opções

Yes it will work from one good machine. Remove your old HD and put it in an external case. (Since new machines can boot via USB you don't need a firewire connection) Connect that to your new machine... you can use Migration Assistant to move the entire contents (including account) to your new machine.

If this Answer is helpful please remember to return and mark it Accepted.

Esta resposta foi útil?

Sim Não

Pontuação 2

1 comentário:

Thanks so much...answer was exactly what I needed. Migration went off without a hitch.

11 de jan de 2013 por Ryan

Adicionar um comentário

iMac Intel Reparo

Data Transfer between iMac with faulty logic board and new iMac Intel

1 resposta

Adicionar a sua resposta