Ir para o conteúdo principal

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

549 Perguntas Visualizar todos

BeePing and black screen after replace HD

I replaced a new HD, plugged my iMac on and nothing. Black screen and beeping. I put the recovery disc in and can not take it out. How can I install a new software? Why my computer is beeping and what a problem with the screen?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação -1
Adicionar um comentário

1 resposta

Solução escolhida

Depending upon the number and duration of the beeps you damaged (shorted), loosened or disconnected a RAM chip. Check the RAM seat - they snap in firmly... if they are not loose try running ONE CHIP in one side, then the other (only one chip/slot may be bad).

If this answer was helpful please remember to mark it accepted.''

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Anna será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 4

Duração total: 630