Conserte seus objetos Comunidade Loja

A garage door opener is a motorized device that opens and closes garage doors and is controlled by switches on the garage wall.

6 Perguntas Visualizar todos

Opções

Garage door closes after opening

Hello!

Recently my garage door started closing immediately after being opened via the remote or the button inside the garage. After several attempts to open it, it finally stops going down again, or if you push it upward when it's near the top, it seems to stop it.

Anyone know what would cause this, and if there's a simple fix, or do I need a new garage door opener? Getting my car in the garage is like playing a strange video game, and one of these days it's going to scrape my car! :-(

My garage door opener is a Sears 139 65 3000.

Thanks!

John

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 2
4 comentários

It eventually stopped automatically closing on its own, but it would still be interesting to know what component, etc., is responsible for this behavior.

por

Don't you just hate problems that solve themselves?

por

I don't mind them, as long as they stay solved, and don't become intermittent (as they usually do)

por

I had same problems although i was told even by eco that they dont auto close they sent a pdf and it had instructions

Hold up button until horizontal line appears on screen then push up or down a number will appear 0 is deactivate 1 being shortest time up to ? Longest time press set to select

por

Adicionar um comentário

4 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

I wonder if it's "reversing" (Not closing on it's own) because it's binding or hitting an obsticle near the end of the upward portion of your track - check your supports, one may be lose or have dropped a bolt/nut that's in the track. If you have torsion springs the cable drum/pulley may bind at the end of upward travel.

There are "tensions" or adjustments that can change the amount of pressure before reversing starts.... that may have vibrated to a setting that's too quick to reverse.

Esta resposta foi útil?

Sim Não
Pontuação 2
Adicionar um comentário

Opções

There is an 'open force' adjustment that can be changed. Sometimes it goes out of adjustment over time as the weight of the garage door can change with humidity or moisture and/or the springs change tension especially after being replaced. Or as machead3 states, through vibration from ther drive train.

The manual for this opener can be downloaded:

http://www.managemylife.com/mmh/pd_downl...

Reference page 13.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Opções

I think it could be something in the eyes at the bottom of the door not lined up.

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Opções

I had same problem and although told they dont auto cose i have found setting for eco .

Press and hold up untill horizontal line appears on screen then push up or down a number will appear 1 is shortest time higher longer 0 is auto close off

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

rdklinc será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 16

Últimos 30 dias: 60

Duração total: 7,655