Rep: 1
1
I'm trying to pinpoint a problem with the Ambient Light Sensor for the 4S, whether it's a software problem or something else?
I replaced the power, ambient light sensor, proximity sensor flex cable yesterday but the problem still remains.
Has anyone had any success?
iPhone 4S
iOS 6.0.1
Thanks!
Esta é uma boa pergunta?
Rep: 91
3
1
this sometimes happens when you have OEM display. have you changed that recently?
Esta resposta foi útil?
Not OEM but I did install the foam that separates the sensors. Proximity sensor works fine...
Rep: 13
1
Instructions
Grab a flashlight or go to a dark room. This might sound like a joke, but bear with us, since the end results are completely worth it.
Launch the stock Settings app on your iDevice and head to the ‘Brightness & Wallpaper’ section.
Turn off the ‘Auto-Brightness’ toggle.
If you went into a dark room and there is no light around, drag the brightness slider to its minimum level. For those who can’t find a dark place, hold a flashlight (or any light source) as close the iPhone’s screen as possible, and crank the slider to the maximum.
Now that you have calibrated the sensor, toggle on ‘Auto-Brightness’.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 5,587
