The noise and slight vibrations are coming from the back left side of the dryer. The machine has always been relatively quiet - no so anymore.
Esta é uma boa pergunta?
Rep: 782,4 mil
1,1 mil
893
2,3 mil
Bruce Martin, check the support rollers (20) and make sure that they are properly aligned and that the bearing have not seized. That could cause noise as well as vibration.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 455
7 comentários
Would you have a model number for this Maytag:-)?
por oldturkey03
Model # is LDE9304ACE.
por Bruce Martin
Thanks, old turkey. Where are these rollers in relation to the rest of the machine, or, where can I find a schematic drawing of this machine that tells me where to start taking it apart (I assume the back panel would be removed first).
por Bruce Martin
Take a look on here http://fixitnow.com/2003/11/appliance-ti... and check the "Maytag" paragraph. I added a step to the original answer:) hope this helps.
por oldturkey03
contact me by email if you need a service manual. My address is in my profile.
por oldturkey03
Exibir mais 2 comentários