Have you verified that there's power getting to the rearview camera when reverse gear is selected?
-
Here's the wiring diagram and connector pinout for the rearview camera for your vehicle.
+
Here's the wiring diagram and connector pinout for the rearview camera for your vehicle. Presumably you have an aftermarket head unit installed but the camera end would be the same, so you may have to check each of the wires from end to end between the camera connector and the headunit connection to make sure that they're connected correctly.
-
If there is power available, then perhaps the camera module is faulty. If the module is faulty, according to this link the part number is [https://www.hondafactoryparts.com/oem-parts/honda-camera-assembly-rear-view-wide-39530t7a003|39530-T7A-003] but you may wish to verify this. If it is, search online for the part number only, to find suppliers that suit you best.
+
If the wiring is correct and ''if'' there is power available, then perhaps the camera module is faulty. If the module is faulty, according to this link the part number is [link|https://www.hondafactoryparts.com/oem-parts/honda-camera-assembly-rear-view-wide-39530t7a003|39530-T7A-003] but you may wish to verify this. If it is, search online for the part number only, to find suppliers that suit you best.
Hi @ellenmatthew,
Just double checking.
Have you verified that there's power getting to the rearview camera when reverse gear is selected?
Here's the wiring diagram and connector pinout for the rearview camera for your vehicle.
If there is power available, then perhaps the camera module is faulty. If the module is faulty, according to this link the part number is [https://www.hondafactoryparts.com/oem-parts/honda-camera-assembly-rear-view-wide-39530t7a003|39530-T7A-003] but you may wish to verify this. If it is, search online for the part number only, to find suppliers that suit you best.
[image|3318382]
(click on image)