Eu gostaria de saber se é possível trocar estas 2 partes do macbook pro (Tela e a base)

Obrigado.

⟐ Answered agosto 06, 2019 at 16:59 GMT-7

Queria saber o que acontece se eu desligar o SSD do meu macbook pro e ligar sem o SSD.

Agradeço desde já.

⟐ Answered abril 01, 2018 at 6:55 GMT-7

Não consigo abrir o arquivo de extensão XLXS no meu Mac Pro 2015. Recebo esta mensagem de erro: O Microsoft Excel encontrou um problema e precisa ser fechado.

O arquivo foi enviado por e-mail.

Como recuperar arquivo do Excel?

⟐ Answer edited junho 15, 2017 at 9:31 GMT-7

E o Macbook simplesmente não liga

Sempre em todos os processos eu desconectava a bateria por precaução, até que pela última vez, religuei, e simplesmente não funciona

Tentei apertar o botão lateral indicador de bateria e ele não funciona

Quando conecto na fonte na energia sem a bateria ela também não acende

O que pode ter acontecido? Qual a solução?

O problema surgiu logo após eu fechar a tampa para sair e quando abri novamente para continuar meu trabalho (sempre abro segurando a tela pelo meio para evitar torções) a tela ficou rosa.

⟐ Commented julho 04, 2025 at 15:14 GMT-7

Hi guys, I hope you're doing well. I turned on my mac and all of a sudden it shut down. He's done it a few times, but this time he didn't care anymore. I took advantage of it, disassembled, changed thermal paste and to my surprise the disassembled plate turned on. I thought it was dirt or something. I put everything together and it didn't turn on. I remembered that from time to time he didn't connect a pendrive, I imagined that it could be the hdmi card, usb and memory card. That was exactly it. I unplugged the cable and it turned on. My question is: Is the problem with the board or the cable?

⟐ Edited by author dezembro 06, 2023 at 12:46 GMT-7

⟐ Edited by author maio 16, 2022 at 7:16 GMT-7

Preciso da vossa ajuda para tentar perceber se existe alguma relação entre as trocas sucessivas da top case ( por problemas na touchbar) e o dano na Logic board.

2 semanas após a troca da topcase no meu MacBook Pro a Logic Board, i7, 2.2GHz, 16GB, 555X, 256GB o computador começou a aquecer e a não manter a carga da bateria.

Mandei um e-mail a advertir para o facto na loja que fez a substituição ao abrigo da garantia e pediram para levar o computador para um diagnóstico. Após o diagnóstico recebi a triste notícia de que o problema estava relacionado com a board e de que esta teria de ser substituída com o custo de 768€!!! Perguntei se o dano na board não estaria relacionado com as anteriores substituições da topcase uma vez que foi a seguir a sua substituição, disseram-me que não estavam relacionadas.

Alguém me pode esclarecer sff.

Obrigado

Meu MacBook começou a travar sua tela e reiniciar com o barulho dos 3 bipes, que indica problemas com a Memória Ram.

Fiz o teste de retirar elas, limpar e recolocar, infelizmente continuou o problema.

Fiz o teste de utilizar apenas um Slot e apenas uma Unidade de Memória, e ambas funcionaram normal em ambos os Slots! Agora eu consigo utilizar o MacBook normalmente com apenas um Slot, mas se eu utilizo os dois Slots, após um tempo o Macbook trava a tela e desliga.

Ps: Utilizo Memória Ram da Elpida (2x4gb) 12800S.

Ligando direto nos contatos da placa logic board

Exrcicio d teste. (tentei escrever Exercicio de teste) e ele saltou várias letras como podem ver.

Outras vezes aparece um ee que não teve um duplo click na tecla e.

Este facto ocorre aleatoriamente.

Como se trata já de um equipamento de substituição, queria saber se existiam mais casos iguais ao meu.

Cumprimentos

David Crespo

⟐ Edited by author setembro 21, 2018 at 12:39 GMT-7

⟐ Answered outubro 29, 2025 at 1:11 GMT-7

My iPhone has connected perfectly until today, when it started doing the same thing as the iPad. All other USB devices work fine, and my iPad and iPhone both connect with the windows computers at work just fine. I've tested with both USB ports on my MacBook, and with several known working cords, both Apple branded and not.

I've done a lot of searching, and haven't found any definitive answers or solutions, but today I thought I would try something.

I use Windows 10 in VMWare on my laptop for work (and yes I made sure it wasn't running before trying to sync to make sure that wasn't causing the connectivity issues). But today I opened Windows on my MacBook, and when I plugged in my iPad I told it to open in Windows, and voila it connected to iTunes in windows fine and stayed connected.

This leads me to believe it is some sort of software issue on the MacBook side of things. I even tried closing itunes and just plugging my phone in to charge, and it again acted as though I was continuously plugging it in and unplugging it, but stayed connected in Windows.

Is there something I can do to correct this? I thought it might be an iTunes issue, but since it wouldn't even keep my phone connected enough to charge without iTunes open, I'm assuming it's an OSX issue.

Any suggestions would be greatly appreciated!!

⟐ Commented outubro 14, 2025 at 22:45 GMT-7

Other symptoms includes No audio devices found(cant play sound)

Is there any possible reasons for this? I highly doubt is a software problem.

hey guys an update on my issue, i never went for a fix, the problem went away after i left it to rest for a few days, i believe its an overheat issue. my screen has been working fine for the past few months since reporting this. Not sure it will come back, but this is definitely a faulty hardware, and Apple is not admitting it!

Affected model: 2016 Macbook Pro touch bar

I never went for a fix till now and using the same mac, the problem still comes and go, usually happen when overheating/heavy usage. I brought my macbook for de-dusting the fans and apply new heat paste for my processor in hope that it can reduce overheating issues, replacing the whole display costs too much.

Apple did an update for this issue for the FlexGate issue: 13-inch MacBook Pro Display Backlight Service Program. Sadly it doesn’t cover the T-CON issues.

⟐ Commented julho 01, 2025 at 7:48 GMT-7

⟐ Answered julho 09, 2025 at 5:09 GMT-7

Here's what's going on:

I have an A1226 15" MacBook Pro (mid 2007) with serial number: W872218YX92. I can't get it to turn on; whether it's plugged into the AC adapter or on a battery, I get no visible or audible response from the machine when I push the power button--none of the lights turn on, none of the fans spin, etc.

I've read about the nVIDIA 8600GT issue, but I don't get any response from the machine at all, so I'm not sure if that's what the problem is. The other thing I've read could be at fault is the 'Left I/O' board', but this thing won't turn on when using AC or a battery. One thing I haven't tried yet is to open it up and check the top cover power switch; is the power switch something that frequently breaks?

Lastly, when the MagSafe adapter is plugged into the machine, the LED on it always glows green--whether or not the battery is plugged in. When the battery is plugged in, the 'charging' LEDs on it do not light up or blink and thus the battery does not charge.

⟐ Answered julho 10, 2025 at 23:42 GMT-7