Hover-1 Folding E-Scooter Troubleshooting

Thanks Melissa, mine was working for a week and then stopped responding to my kick off max throttle push. It was great until now it won’t move when I push the throttle. I wasn’t aware of a USB port on this model. I’m pretty sure my Hover 1 scooter doesn’t have a USB port

What is a explanation mark in a circle

How do you turn it off my scooter will not function at all

My scooter still won’t turn on despite being fully charged, do you think there’s something wrong with the display or the power button isn’t fully connected???

Our scooter worked great for one day. Went to ride it today and noted it was making a strange buzzing noise and it won’t turn on. Now we are afraid it’s going to explode. Any suggestions?!

The one thing someone noticed was if you unscrew under the display…there are wires that connect directly to it and when I first purchased it they were not plugged in! After someone plugged it in and I charged it, it worked fine. However it happened again so I did the same thing well I must have screwed until the display because now it won't go very fast and there's a line on the display. So be very careful if you take it apart and put it back together. I'm very disappointed with this scooter and I wouldn't recommend anyone to buy it!

Ours says E2 on LED screen. What does this mean?

The throttle on mine stops working. I have to turn it of and on again for it to start working for a couple of yards, then it stops working again…

With the E2 code and them not starting up, try to unscrew the display and see if the wires came unplugged!! That's what my sons did. I plugged them back in and charged it then it worked! But be careful screwing back in so you dont hit the display! Our scooter wont go fast any more. It barely goes. This company is ripping ppl off and getting away with it! They're getting money for selling junk!

my back wheel sound like it is rubbing/squeaking. Any thughts?

My scooter just says e2 and won’t let me ride it how do I reset it

Just bought one a couple of days ago worked perfectly fine first day. This morning riding home I was going at 13 mph and it stopped suddenly. Now the screen is stuck at 13 mph doesnt want to turn off or restart. When I turn the lights off the scooter keeps making this noise and the only way it'll stop is if I turn the head lights on

My scooter won't run and the battery simple is flashing

I rode my scooter in light rain and when I got home the screen of my scooter blinked saying E9. What does this mean? Water damage? Charge it? Idk help lol

I think y’all just need to try to return it! I tried emailing the company first … it took a week or so and then they finally responded back requesting pics and more info. I responded and another couple weeks goes by with absolutely nothing. We decided to just return it and a couple days ago they finally responded that they do would forward it to the tech department and get back to me yet again. Ummm no thanks!! Return it while you can! By the time they get back to me it’s likely to be out of warranty!! Horrible customer service!

The battery light is blinking and my scooter won't run

Can any body help me my scooter turns on and the battery light is flashing and my scooter won't run

Just bought one of these, charged over night, turn the power on and it goes straight off again

Help just want to know why my scooter keeps powering down when riding it for like 10 mins and the battery was fully charger.

Does anyone know why the pioneer charger shows green light even though scooter is completely dead? It’s not charging at all. Any suggestions?

Does anyone know what the E2 error is and how to fix it. Every time I turn it on and get this error and it keeps beeping.

My mom bought 4 of these things one say E2 the other one not charging the other 2 front will dont wanna spin they just getting our money its so crazy how to i get it fixed or get money back

The scooter wont turn on

My son got his scooter Jan 2020, yesterday it just turned off. Will not turn back, will not charger. I’m seeing several similar comments

anyone found and answer ?

Ok my scooter turns on all lights and components work just fine it's just when i hit the throttle and push off to go forward the tire dose not engage so what can I do to possibly fix my scooter

My son’s scooter has stop working and will not charge or even turn back on. Has anyone experienced this? The scooter is only 3 months old.

Anyone have a problem with the motor shutting off mid ride? Power stays on, but no juice. Have to power cycle a few times.

It will show fully charged and after riding a couple of minutes it just dies

Mine I have rode 3 times and now it turns on but throttle won't engage back tire. It was full charged and died instantly after a 2km ride around. Didn't charge and it showed full battery the next day but would not turn on when pushing it back home the other day.

These scooters are so badly designed and with questionable components. The price was to good to be true. My mom's mad.

Same issue is happening to me, the scooter powers up with full power, however, the wheels are not rotating fully and not responding to the throttle switch. Eventually it just cuts off as if it dies. Smh. What a piece of $@$*! I bought 2 of them and they both are doing the exact same thing.

just bought scooter set it up charged it worked for about 1 min and the completely died went to go re charge and try again front wheel is locked and wont go any know how to fix this?

plug in (while on) and turn off then turn back on. (I DO NOT KNOW IF THIS WILL BREAK THE CIRCUIT OR ANYTHING BUT IT WORKED FOR ME)

My display screen says e4 and it dose not move

What happens if it says E2 on the screen and how do you fix it

steering will not turn toward the right

I fixed the steering by placing the front wheel between my feet and turning the wheel hard to the rig;ht. then I checked the steering by turning the steering wheel to the left and to the right.

My son is having the same problem E2 showing and having problems with speed especially in high gear. I understand this has to do with the accelerator which I am assuming is the throttle. Anyone have a fix. Going to work on it tomorrow to check for loose wires etc. Try resetting. Hopefully something with work. He has only used it 4 times. SUCKS I can’t even find a part number for the throttle.

The whole front is loose and can't figure out how to tighten it handles pointed one way tire is straight also saying e2

I threw my scooter and now the screen says e2 what do i do

Why when I’m driving my hover 1 schooler shuts down while driving & battery is full won’t turn on untill I plug in the charge for one second then turn back on & batt is still full ?

I hit a bump on the sidewalk ……. Not my trottle dont work. I turn on my scooter but it dont do anything on this hover 1 eagle scooter

Bought the hover-1 transport electric folding scooter and my son has driven it like 4 times. It has a full charge on the battery but the screen won't turn on can anyone help? It's a brand new scooter i just can't figure out how to take it apart to see if any wires are loose or something

The throttle will not engage to run motor even with kick start. E4 shows on display. That means that the mos is bad correct. Can that be fixed with reset. If so then how to reset it..

I now just have the exclamation point on my display with no other codes. Anyone know what it means?

Why does the pedal not work after you press t he brake? The scooter stays on but when you press the pedal to go it doesn't work. This also happens randomly when im just riding and the break light starts blinking and have to turn it off and put it on again ???? Very frustrating!

I have a Hoover one Pioneer scooter and it's reading a e 9 code on the display panel saying something about the faulty brake I need help to fix it to clear it

It keeps turning off suddenly! It’s very annoying.

I hit a bump and flipped forward on my Hover-1 Eagle, breaking the right side throttle level and the circuitry inside. I need a replacement, but none are offered on the website. Will any model Hover throttle work?

When you turn it on an error shows up stating E1

What do I do if my brake in the front is not working well. I was riding my scooter and when I press on the brake it slows down the scooter but not very quickly.

The front wheel comes off. It needs the threaded screw and cover for the front tire to stay on

My son's hover one folding electric scooter was not working. I took the thrott le off and checked all the wires and when I put the throttle back on I loosened it up a little bit and it's been working fine ever since. Hopefully It will stay that way

If you type in hover one manuals you can find out a lot of information for the type of hover one you have. Not sure this will help for any of you people having issues but it's worth a shot

I bought this scooter (Hover -1) I rode it lightly, probably under two hours; in the two months time span of owning it. I rode it yesturday, put it on the charger that night. Woke up, tried to start it up, not turning on, can’t believe the scooter doesn’t turn on.

The charger cord shows green, as if it’s fully charged. I’m at a lost for words. Very disappointed, stay away from this company and there products.

Just paid 259.00 for this piece of junk back light flashing red and front tire seized up with my 100.lb child on it ..and no help from Hoover ..they need to be sued

Hi, I need help,

my led display does not show the speed (Mph) and the battery indicator, it rather show if it’s in speed mode 1 or 2,

hope you can help me how to switch it back to the original setting. I have the hover-1 pioneer

thanks in advance

Tighten the steering, cause every little bump on the sidewalk adjusted it. Kinda like when you stand with the bike tire between your legs and you can spin the handlebars. Well I thought I fixed it. It was tight. No. It's completely worse. The whole shaft rotates. And I probably should have needed stitches during my fall on the way back from the store. Rip $200

My scooter says E4. What does that mean and how do i fix that??

Does anyone know how to take off the panel on the handlebar to check the wiring?

Error El-motor hall failure, the motor needs to be replaced

Error E2 - accelerator failure, the accelerator needs to be replaced

Error code E3 - motor blocking fault, release the accelerator Error E4/MOS - mainboard MOS tube failure, the mainboard needs to be replaced

Error E6 - controller / instrument communication failure, the controller needs to be replaced

Error E7 - battery over-voltage protection, the batter needs to be replaced

Error E8 - controller error, the controller needs to be replaced

Error E9 - brake failure, the brake needs to be replaced

So class action lawsuit anyone?

lets do it email me at yzbrocks@gmail.com

So um, has anyone tried cutting off the shrink wrap to check the connectors under the display? You can gain access by removing 4 Philips head screws on the bottom half of the control bar flip the scooter or lay down and look up if you can't find them. Also use delicate care when putting the screws back in. One way to avoid stripping the soft plastic is by turning the screw left until you feel it fall in the threads then ribhten them by hand and they don't need to be touqued so go easy ok. Insinde you will find 5 plugs wrapped in probably black shrink tubbeing.

just cut allinr off the tubbeing btw do not cur the wires or you got another issue to fix. anyway on mine not 1 of them was snug. I noticed flicking the wires cut the power. This would do such things and give false readings of faulty parts. So whoever did the display assembly installment was probably lazy. But the plugs are also $@$* quality. This isn't something any customer should have to do on a $300 scooter or any scooter for that matter so I do see a case here if we can get enough people to join in and would like some well call itᕦ(ಠ_ಠ)ᕤ

Hover-1 Stimulus tag your email I just on the list to get up to $300 from Yahoo for some hack a decade ago. &&^& this company. Burning down our Christmas was bad enough!

Ugh dang it. Hey friends. Makke sure you mark the connectors before pulling them apart. Smdh

Ha! It worked. Error code is gone. Gonna get my shoes on and try her out. Whoop!

this list doesn’t help much with no part available. The brake issues seem to be happening on many hover scooters.

I just got hover-1eagle from Walmart the front wheel is not working right. I love it. Please help

Hello, any ideas where I can get a folding lock for the Hober-1 Pioneer? thank you

Help! My hover way sprinter bought last May 2020 but every time I charge it's only 2bars and easily drained do i need to change the battery,where i can buy it..?

Help I’ve had my scooter for about 6 months and it won’t turn on after not using it for 2 months I’m most sure what the issue is

When I turn the scooter on the led screen say E2 and just flashes on and off what does that mean and how to fix it. Was working just fine and then it was charged and now is flashing E2

I had a wreck on my scooter, it looks to be same model but I bought new under the name of “Leggo” which is the only marking on the scooter. It is now showing error code E2. Can anyone assist?

The power is tripping , it turns on goes for a little then dies , any suggestions

My son fell and the handlebars and wheel are kind of opposite directions from each other how do I fix this and get it back even with the frame?

Jim Reed, Id say you have the 100 people. Following the speed controller issue.

I got a E2 Code what I do

Add me to the class action lawsuit! We have the Pioneer, bought it on Black Friday from Walmart (ugh), my kid used it intermittently maybe a total of 5 times since then. First, the battery won't charge to 100%. Once it hits 3 full bars, it stops charging. Secondly, my son was saying the unit would stop at random times. Upon testing it out for myself, I confirmed the unit turned completely off when I hit 9 mph speed. All of these complaints are truly sad. These poor kids (and parents!) Shame on Hover-1.

How do u fix a E6 error

E6 error? What to do?

E6 error means the Brake grip on the handle bars is bad. It needs to be replaced but I can’t locate any parts to replace it.

You can take it apart and see if you can fix it. Mine had a cut cable.

How do you fix error code e4?

I have had mine for literally 90 day’s right after their warranty expired and it stopped working completely!! I paid a lot of money to get 3 months out of it. It will power on but will no move, there is a lot of resistance in the front motor so it appears to have failed. There has to be a class action lawsuit started for this pos.

Anyone know how to disengage electric brakes to stop beeping? My son broke it and we just want it to stop beeping.

I turn mine on that says e2 and beeps and that's all it does

Hi ,my scooter screen is written EI full charge but doesn't work.i need please help.Thanks

Here are the error codes again.

Error El-motor hall failure, the motor needs to be replaced

Error E2 - accelerator failure, the accelerator needs to be replaced

Error code E3 - motor blocking fault, release the accelerator

Error E4/MOS - mainboard MOS tube failure, the mainboard needs to be replaced

Error E6 - controller / instrument communication failure, the controller needs to be replaced

Error E7 - battery over-voltage protection, the batter needs to be replaced

Error E8 - controller error, the controller needs to be replaced

Error E9 - brake failure, the brake needs to be replaced

Has anyone got a Replacement scooter threw the company yet?

Is there anyone who knows why my Hover-1 Alpha shuts off when it is cold outside? When it is warm out it runs great but when I leave work at 3:30 AM it only goes about 10 minutes before the electric shuts down and wont come back on until the next day after it warms up. The thing is that it’s only down to 50 degrees. Is there a sensor that needs to be replaced and can you tell me where it is located?

Send me any info to ; twooley6@gmail.com Put HOVER in the subject line. Thank you in advance.

What does an e2 error mean? I can’t find it anymore. Customer service won’t help at all

So I hit a bump really hard and now it is flashing E9 is there any way to reset it or what can I do

I need help, my scooter was working fine until yesterday and today. Yesterday, the throttle was being very spotty and I felt like the entire handlebar wasn’t exactly as stiff as before and I could twist it forward and backward, I was able to get it to go when I twisted it a certain way. Today, I tried using it today and no matter how I manipulate the handlebars. It doesn’t go. The brake and headlights are working but the throttle just won’t go. And I can see on the screen the icon is lit up where it says the handlebars are not all the way screwed in when they are.

I have the perfect solution to all these problems that seem to be following the Hover 1 Alpha scooter.

Here is what I did….. I sent it back to them with a detailed note on where they can store the P.O.S. scooter. I will get my $400.00 back and invest in an E-Bike. I don’t believe a toy should be this much trouble. Good luck to all of you.

The stabilizer bar is loose, and turns to the left or right when riding down the street.

How do I tighten?

I am fuming. Bought hover1 aviator yesterday. Charged over night. Gone to use it and turned it on. Went to use it. Front wheel doesn't spin properly and is stuck on 05mph and won't turn off now. I can still change to p1 and p2 and put light on and cruise control but no power off, Wheel won't work and stuck on 05 when not moving. Help. Argos arw no help and can't get anyone to pick up all day ringing to company

scooter doesn't turn on

I have a w2002 motor scooter. I never lucked the steering once I pulled it up.. my scooter shuts off is that normal. After attempting to go uphill

2000w dual motor scooter

I fix my tire ( rear flat ) and now the scooter doesn't want to run

My scooter will start going like the wheel will barley nudge and then it jerks forward and then turns off. After that it won’t turn back on for a while. I have an extra motor but I’m not sure if that’s the issue or how to change the motor.

Brand new out if box & will not power on.. Help? I've done the reset already.

Charger not charging my scooter light stays green every time I check back after hours it’s still on the same charge

I can’t move the handle from my dynamo scooter

I need a power board for HOVER 1 Engine Kick Scooter.

I have the Hover-1 Aviator. Charged it for 5 hours like it said and the scooter still does not come on after holding the power button for 3 seconds. Created a ticket over a week ago and have not heard anything back yet. Anyone have any suggestions on what to do????

Every time I turn on my scooter it's doesn't turn on but the light in front does and stays on for about a minute if you have a way to fix it please help

It turned off after about 5 minutes of riding and won't turn back on

I am super !#^&@@ as well! I bought this for my daughter for her birthday and after a month and half it quit working and showing code e6. Went to Best Buy where I bought it and they couldn’t help me. I wrote the warranty company 5 times and never responded to me. I have thought about suing them because I’m !#^&@@. They have no number to contact them! It’s so messed up

Why does my hover 1 alpha battery go up and down while I am riding?

Do you sale replacements for the folding lock mechanism

I had this scooter 30 days before it started messing up. When I turn it on it rides for 10 seconds then cuts off. Battery is full. Why is it doing this?

E9 REPAIR error code .. if your scooter has a flashing rear brake light. IF the displays SHOWS E9 then you have a bad brake lever switch. Look just under your brake lever and there is a white plastic piece find some way to keep that in and code will be gone..

While riding the scooter my 12 yr old daughter said the front wheel locked & caused her to crash. After the fall the front wheel would not turn & now it doesn't take a charge. I too have reached out to the company but no one has replied to my emails, tickets, phone calls. The Hover 1 Eagle scooter work well until this happened, and hasn't worked since. We had 6 months before the wheel lock malfunction. Still no contact from the company

Mine was working just fine then stopped all of a sudden at full battery and hasn’t worked since, nothing will turn on with the control panel, when I press the power button the front light and brake light comes on and makes a beeping sound, help I don’t know how to fix this

This is the second one we have owned. Bought the first Hover 1 Eagle for Christmas 2020. Used twice threw a code. Contacted hover no answer. Contacted Walmart returned old and got a new one because it was only within 2 weeks. Has had no problems until today threw code E2. Not even going to try and contact Hover no point. I see that it is an accelerator problem or throttle issue. Will try and take apart to see if any loose wires.

Bought the dynamo for my kids and one of them doesn't go over 7mph. And when its on the 1 it goes by itself

My scouter keeps turning off when I ride it I think it might need a new battery I have only had it for a year?

Hur satter

Man PA

The latch at the base of the handle does not latch to help support the handle to stand up right on it’s own. What do we do?

My hover 1 scooter is great. Just now my front wheel shakes an makes noise. Apparently the front wheel is loose how can I tighten the front wheel?

Hello K in KS I just bought a scooter alpha yesterday and I was able to get the back tire aired up and good to go I went to add air to the front tire and I can't get it aired up by the time we get the air inflator in hose unscrewed it's already flat???? What's going on?? Please help?

Hi.. I am having issues with my scooter but dont know what the problem is so appreciate any help. When i press the button it starts and runs all fine but then when i switch off the scooter, it wont turn on again. I have to disconnect the battery and connect again for it to work. Any thoughts.

The hover board want charge

I bought the hover 1 alpha like almost 2 months ago and now it's reading an E9 code but the brakes are fine. It'll turn on but it won't ride. Idk what or how to fix this

My scooter displays full charge, but once I start riding the charge drops 2 points spontaneously and once I stop it charge grows up to the previous point. I don't understand what the heck is happening.

Hover-1 Dynamo: What accessory is used to inflate rear tire? Bought an extender that doesn’t fit tire.

Does not connect to Bluetooth

Need help. Was riding down the street with a full battery and it was a cool day but the scooter gave me some kind of E error message and then just shut off. It has yet to come back on. I've held the power button down and nothing. Also plugged it back in and nothing. What do I do?

How do I reset the computer on the eagle One scooter I just bought

Senergy scooter folding mechanism jammed

steering column is loose

Hi how do I replace the front wheel of Hover 1 electric scooter. My son popped the front tire as he was riding it. Please I need help. I would appreciate if someone could tell me how to fix the front tire not the rear tire. Thank you in advance.

Please kindly Help me for E8 Error ?

I had a hover 1 with the stiff front wheel and error code. No support from after sales, no replacement parts available so just bought a 36v controller and display off Amazon.

Works a treat and no longer has the hover 1 brand internals that you cannot buy or replace.

Controller needs to be put in a small stem/handlebar bag because you can't buy the shape of the original to put in the stem

Best advice I can give

Jason many thanks :(

Red handlebar light on screen and scooter will not go??? Hhheelllpppp

My phone is paired with my scooter but speaker is not working

My scooter is completely off. When I plug

in the charger I notice the light is green and not red anymore. When I try to charge it, the light stays green. What can I do, to turn the scooter back on?

We just got ours and can't get the steering column to tighten

Scooter said e8 and shut off on me and won't turn back on

Hover-1 dynamo electric folding scooter will not turn on I tried to check battery but there are not screws on bottom of scooter so how do I get to the battery to check it

E1 and unable to fix or reset. Any suggestions?

The lever on the front where to fold it down on my hover-1 alpha scooter will not claps at all it is pretty tightly to do so is there a fix for tha

The side where the throttle is fell over and the spring or coil popped out now you can’t make it accelerate or go using the throttle I tried shoving it back in gently any repair shops?

Hello. I have a hover 1 journey electric scooter and the throttle lever is very stiff. When I press it down to go, it won’t come back up. It stays down causing me not being able to stop. What should I do?

The first thing I would try if you get an error code is to remove the handle bar from the stem, disconnect the main electrical connection, blow on each side of it to remove any water and/or dust, and reassemble. The diagnostic system doesn’t seem to be very robust.

I just bought this scooter used and the wiring to the throttle was all taped up and today the throttle wiring came unplugged and I don’t know which wires to connect to which the throttle has three wires red white and black but they wer connected to four wires which are two brown and two orange can anyone help me please ?

Bought from Best Buy, 3 months later neck assembly broke while riding. I now have a plate and 5 screws in my ankle!!! Would like to repair, but can’t find replacement part, or get customer support to respond! Good smooth ride, poor quality in folding lock, broke a week after purchase so I locked it with hose clamp. Then internal neck broke from bottom clamp.

Why can't I find anywhere for a replacement front wheel motor for my hover 1 rally?

My scooter powers up, battery is fully charged, no error codes. But when you kick off to go and give it throttle it powers down. You then have to wait a couple minutes before you can power back up. any help would be appreciated.

Scooter will not go. The battery is fully charged, no error codes, but when you kick off and advance throttle the Scooter powers down. Any help would be appreciated.

One of My scooters will not power down when ride is completed. I’ve pushed the button and it doesn’t shutdown like my other one Can I reset it somehow

Thanks for any help

I dont know how I ended up here but thank God. I like the scooter, or did anyway cuz after reading all these horror stories my blood is boiling! Poor kids-it sucks!

Anyhow-the steering wont steer it seems like when I turn the Handlebars that the wheel will not turn with me so it's kind of slipping it seems. I've looked on the Internet but nothing has come up yet on how to fix it on YouTube or anything so can you please help how do I fix this myself ? Because obviously reaching out to the company will not work. Thank you.

Cruse not working

how do fix the scooter to move forward?? my scooter is moving backward. please help asap

problem: I have a hover-1 Blackhawk. Scooter wheel starts to turn the moment power is on. Turned cruise control off but problem still persists. I believe it is an issue with the throttle. I have been opened up several tickets to no avail. I have been trying to find spare parts but they are not available. I ordered a throttle from ebay but it came with 3 wires rather than 5. Please let me know if I diagnosed the problem correctly, and help me find the parts to fix this. Thanks

Can you replace a broken release lever

The scooter will not turn off it will not do anything when you press the button on top it stays in slow mode

My hover one that I got says he won when you turn it on what's wrong with it I have no idea I've tried everything that I know of and I hope you give me some type of quit answer for this first one of these scooters that I've actually had

So I was riding down hill and throttle at max so 25kmh then when I went to brake I couldn't brake, the e scooter brake was not working so i turned off the scooter and pulled into a parking lot, then I turned it on and when I pressed the throttle I went to max speed and I was stuck at it and the throttle was not physically at its max state pulled back, like the computer was failing so failed brakes and weired acceleration, any tips or something to help because I nearly lost my life and had to jump off the scooter, this is not ok even considering this is not the top range scooter this was a hover 1 highlander, Thanks.

It won't power on and the indicator light on the charger is green

I have a Hover -1 electric scooter and it Turns On and off but it isn’t letting me drive it

Hi,so my scooter keeps turning off while I’m riding on it and even if it’s charged it still wants to turn off please help I have no clue what’s going on it’s a really fun scooter and I would like to keep it while I can help me NOW!! Asap!!!!!

my aviator e scooter wont turn on after i charged for 2 WHOLE DAYS!!!! and the front wheel is bumpy and slow

When I turn my scooter it has no throduel

Does the front tire get very hot for everyone or is it just mine on hover 1 highlander pro

I have e2 accelerator failure. Is the accelator the Bush down throttle or is it a part inside? I went down a small bump, curious cut out, it shut off. I turned back on and e2 error. Do I just have to check the throttle or replace it. Or is it a different part

My scooter is stuck and is only saying E2 will not go

My scooter was low on battery when I was using it once but then I died with E8 on the screen and it won't turn on how can I fix this problem?

I have a Hover-1 Scooter. Every time I turn it on the back red light starts blocking and it won't work. Any advise would help. Ty.

Mines turned off and will not turn back on and I just got it I don’t know why

Can't get the handlebar to attach to stay upright

My handlebar with not latch to stay upright. Help please

I have the Hover 1 highlander pro and when pressing the power button the display will not turn on, only the brake light flashes! Is there a reset procedure or button somewhere? Please email me at brodyolson003@gmail.com and put hover 1 in the subject line. Please help it’s my only way to work and getting around

It's fully charged but it won't turn on what could that be it hasn't been rode in like a year because we had to replace the tires

Is the brake/rear light supposed to work? I just bought one for my son for Christmas, and the rear lights does not come on. However--it appears as if it should...including wires to it. Any help/suggestions would be appreciated. Thanks

Has anyone successfully reached the manufacturer? I'm getting nowhere with them!!

I have a e3 error code and how do I fix it

What's the e3 error code and how do I fix it

Trying to find replacement part for the comet 1 hover scooter. The broken part is the plastic black hinge (bracket) that holds the rear fender/brake to the body of the scooter...trying to get a contact number but is a dead end...submitted a ticket and no luck yet. Trying to get the electric comet 1 scooter fixed so kids can enjoy again!

My Rally main computer broke off and is hanging from the wire. How do I reattach it?

Throttle wire pulled off. Which color wire goes to wire connector 1,2,3?

Have A Hover1 Engine Scooter, experiencing slow speeds and failure to reach top speed. Is there a way to recalibrate or conduct a full reset?

Mine stopped working after around 2 years while I was riding it and it hit a bump right before it stopped working

Please help my scooter power button does not light nor does scooter work now was riding it and put it away next day go to ride it and button does not turn scooter on nothibg works please help me….

so i have a hover 1 scooter and the start buttown is swallode in

My daughter dropped her hover-1 and now it won't work. The power comes on but it reads E3 with a green wrench display. What can I do to fix it

Help, Hover_1 not charging

My scooter keeps beeping loudly even though the battery is not low

This is the second scooter I get and it still not turning on this is ridiculous!!! Literally spend money on something that doesn’t work!!!!

i have been using the scooter for a couple months, and now when I go to turn it on the head light and the break light turn on but the screen does not come on.