Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Parece que seu carrinho de compras está vazio
Página 1 de 2
That rubber piece should be put back on the ambient light sensor (pink, purple). Like you said, it hugs against the front camera.
Sometimes just switching to another screwdriver might help. I noticed that the screwdrivers you often get with displays assemblies are just crap. Invest in a good one.
Thanks a lot :)
See this link hrn1203: iPhone 5s Logic Board Replacement
See Jonathan Goldsmith's comment ;)
Not everyone should ditch the bracket just because you did. The bracket is there to keep everything firmly in place.
It's there to keep it firmly in place.
@pollytintop Hey man, your guide is much apreciated !
How long should the logic board be submerged in the alcohol?
Won't alcohol eat on flex cables?
Do you clean the board with a soft brush while the board is submerged or after taking it out of the container?
I currently have a fully working iPhone 6 (except Touch ID) that I bought 2nd hand but the LCI's are pink so would you just leave the phone alone or give it a treatment? Kind of preventive.
Anyways, thanks a lot for everything. You're helping people so much !!! RESPECT !
I use a soft toothbrush :)
The purer, the better. Don't forget to ventilate the room !
Página 1 de 3