Try to restore your iPhone using recovery mode, which may help you exit the Apple logo screen. (1) Connect the iPhone to a computer and launch iTunes. (2) Press and hold the iPhone’s Home button and the Side button together. Keep holding the buttons until you see the recovery mode screen. (3) Once your iPhone displays the recovery mode screen, you will get a dialog box in iTunes that says “There is a problem with the iPhone that requires it to be updated or restored.” Select Restore and then follow the on-screen prompts to restore the iPhone.
iPhone requires you to enter your old passcode to change or turn off your passcode. Therefore, when you forget your iPhone passcode, there is no direct way to reset it. All you can do is remove the passcode by restoring the iPhone. According to Apple’s solution, you can restore your iPhone to the factory settings using recovery mode, which deletes all of your data and settings, including the passcode and Touch ID. However, this is not the only way. If you have an Apple ID on your iPhone and you remember the password, you can erase your iPhone data in an easier and faster way through iCloud. For the detailed steps, refer to this post: Forgot iPhone 7 Passcode but Have Fingerprint. Don’t forget to backup your data with iCloud before you perform the erase. I hope this is useful.
Hi @hannah22, Don’t worry. You need a USB flash drive and another accessible computer to help reset your administrator password. Step 1: Use the media creation tool to create a Windows 10 installation media on another accessible computer. Step 2: Then start your Asus notebook from the installation media. Step 3: Replace the Utility Manager (utilman.exe) program on Windows 10 logon screen with the Command Prompt (cmd.exe), so you can open Command Prompt from the logon screen and then reset your administrator password. For more details, you can refer to this: https://www.isumsoft.com/windows-10/reset-local-admin-password-with-command-prompt.html
Hello. If you need to move Windows 10 OS only to the SSD from HDD drive, a partition cloning app is enough. Check this post: How to upgrade laptop’s hard drive to SSD without reinstalling Windows. If you need to clone the entire HDD drive including all partitions/volumes to the SSD, you need a disk cloning app. But, if the capacity of the SSD is smaller than that of the HDD, disk cloning cannot be implemented.